£9.49–£974.99Price range: £9.49 through £974.99Select options
This product has multiple variants. The options may be chosen on the product page
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£3.49Select options
This product has multiple variants. The options may be chosen on the product page
Camouflaged tubing that shrinks down when steamed. Perfect when used to create a safe, bent-hook effect, helping your hooks turn and catch hold quicker. Available in green and brown variants.
£2.99Select options
This product has multiple variants. The options may be chosen on the product page
A small rubber bead with a narrow bore that are used in conjunction with our hook ring swivels to create the perfect hair arrangement.
Available in black, green and brown. Supplied in packs of 40.
£4.49Select options
This product has multiple variants. The options may be chosen on the product page
Size 8 ring swivels that can cope with any job in carp fishing. These will fit most safety clips and in-line lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The Curve Point hook has an in-turned point and in-turned eye and is also finished in our new slippery PTFE coating. The durable point is more suited to fishing over rock hard gravel areas where sharpness could be compromised when a big carp disrupts the area where the rig is laying.
£4.49Select options
This product has multiple variants. The options may be chosen on the product page
Size 11 swivels with a ring that gives extra-free movement, making these the perfect swivels for use with helicopter rigs.
They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The Beaked Chod Hook has a beaked hook point and out-turned eye. These superstrong hooks are ideal for all manner of big fish rigs such as Chods, Hinged Stiff, Multi-Rigs and D-rig presentations.
Unit E2, Russell Road, Rock Ferry, Birkenhead, CH42 1LU, UK
United Kingdom
AABaits 2025 | Website by Bsetec
Rig Rings
£3.76
Description
Anti-glare metal rings used on the shank of your hook or on your D-rig set-up to give your hookbait extra movement.
Additional information
Small (TARRS), Medium (TARRM)
Recently Viewed Products
Fluoro Pink Wafter Mix
£9.49 – £974.99Price range: £9.49 through £974.99 Select options This product has multiple variants. The options may be chosen on the product pageAfter being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Related Products
Shrink Tube – Medium
£3.49 Select options This product has multiple variants. The options may be chosen on the product pageCamouflaged tubing that shrinks down when steamed. Perfect when used to create a safe, bent-hook effect, helping your hooks turn and catch hold quicker. Available in green and brown variants.
Hookbead
£2.99 Select options This product has multiple variants. The options may be chosen on the product pageA small rubber bead with a narrow bore that are used in conjunction with our hook ring swivels to create the perfect hair arrangement.
Available in black, green and brown. Supplied in packs of 40.
PTFE Size 8 Ring Swivels (TARS8)
£4.49 Select options This product has multiple variants. The options may be chosen on the product pageSize 8 ring swivels that can cope with any job in carp fishing. These will fit most safety clips and in-line lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
Oval Rubber Beads 5mm Tungsten (TAORB5T)
£4.49 Select options This product has multiple variants. The options may be chosen on the product pageThese 5mm tungsten oval beads have a bore that’s narrow enough to hold on leadcore without slipping on the cast. Supplied in packs of 10.
Curve Point Hook – Barbed
£4.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Curve Point hook has an in-turned point and in-turned eye and is also finished in our new slippery PTFE coating. The durable point is more suited to fishing over rock hard gravel areas where sharpness could be compromised when a big carp disrupts the area where the rig is laying.
(pack of 10)
PTFE Size 11 Ring Swivels (TARS11)
£4.49 Select options This product has multiple variants. The options may be chosen on the product pageSize 11 swivels with a ring that gives extra-free movement, making these the perfect swivels for use with helicopter rigs.
They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10
Mini Bait Drill (TAMBD)
£3.49 Select options This product has multiple variants. The options may be chosen on the product pageMini drill that’s ideal for use with hard hookbaits like tiger nuts. Easy-grip handle makes for safe, non-slip use.
Beaked Chod Hook – Barbed
£4.99 Select options This product has multiple variants. The options may be chosen on the product pageThe Beaked Chod Hook has a beaked hook point and out-turned eye. These superstrong hooks are ideal for all manner of big fish rigs such as Chods, Hinged Stiff, Multi-Rigs and D-rig presentations.
(pack of 10)