Our Camfleck camouflage cloth tape is made from 100% cotton. It’s ideal for camouflaging rod butts, storm poles, water containers, tea, coffee, sugar pots and tackle boxes.
All our products are NOT fit for human consumption.
£8.99 – £949.99Select options
This product has multiple variants. The options may be chosen on the product page
*Our new plain wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This new wafter mix has now been made less buoyant, its does still allow you to add base mix (at a lower level) when creating matching hook baits. When being used without any other powders added to the mix a 15mm round hook bait should be roughly, the correct buoyancy and will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of our wafter mix by adding more powders to the mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£2.99Select options
This product has multiple variants. The options may be chosen on the product page
This tool allows Zig Barrels or 6-8mm foam to be easily loaded into the TA Zig Kickers. Position the foam inside the tool so the clasp is half-way along the foam. Thread the narrow end of the tool up through the retaining loop, teasing the loop over the taper until the preformed loop drops centrally onto the foam barrel.
Our 45lb leadcore 1m leaders are made from our Olive Camo 45lb leadcore to suit gravel or weedy areas. The leadcore is broken up into 100mm alternating colour sections which aids its disappearance on all manner of lake-beds. The leaders are 1m in length with a spliced loop at either end.
£7.49Select options
This product has multiple variants. The options may be chosen on the product page
These 5” short nosed forceps will allow you to get a really firm hold of the hook, even if there is only a relatively small section of metal to grip onto. Gently rotate the hook, withdrawing it along the same angle that it penetrated, being mindful to be as gentle as possible, avoiding any damage.
£5.48Select options
This product has multiple variants. The options may be chosen on the product page
Size 8 ring swivels with a quicklink attachment for changing hooklengths in an instant. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
£16.00Select options
This product has multiple variants. The options may be chosen on the product page
A spool of stiff camouflage coated hooklength. Sprayed sections break up the ‘line’ of the rig across gravel, sand and silt bottoms.
Steams under tension to produce a stiffer hooklength. Available in 20m spools in 25lb and 35lb breaking strains in Weed Green, Gravel Brown and Silt Black
£3.49 – £4.49Select options
This product has multiple variants. The options may be chosen on the product page
These beads feature an enlarged central cavity, adjusted polymer and thinner wall thickness to allow consistent lead release when used in conjunction with our C-Clips. Available in green, brown and tungsten.
£4.49Select options
This product has multiple variants. The options may be chosen on the product page
5mm round tungsten beads with an ultra-fine, ‘pin-hole’ bore. Great when used as a bottom bead on a leadcore helicopter set-up. Also available in green. Supplied in packs of 12.
£4.49Select options
This product has multiple variants. The options may be chosen on the product page
A small bead that’s profiled to house a size 8 swivel. Great as a stop for traditional run rigs or when pushed onto the swivel of a lead as part of a helicopter set-up.
Unit E2, Russell Road, Rock Ferry, Birkenhead, CH42 1LU, UK
United Kingdom
AABaits 2025 | Website by Bsetec
Camfleck Cloth Tape (TACCT)
£8.99
3 in stock
Description
Our Camfleck camouflage cloth tape is made from 100% cotton. It’s ideal for camouflaging rod butts, storm poles, water containers, tea, coffee, sugar pots and tackle boxes.
Additional information
Recently Viewed Products
Plain Wafter Mix (New)
*Our new plain wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This new wafter mix has now been made less buoyant, its does still allow you to add base mix (at a lower level) when creating matching hook baits. When being used without any other powders added to the mix a 15mm round hook bait should be roughly, the correct buoyancy and will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of our wafter mix by adding more powders to the mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Related Products
Zig Tools (TAZT3)
This tool allows Zig Barrels or 6-8mm foam to be easily loaded into the TA Zig Kickers. Position the foam inside the tool so the clasp is half-way along the foam. Thread the narrow end of the tool up through the retaining loop, teasing the loop over the taper until the preformed loop drops centrally onto the foam barrel.
1m Leadcore Leader 45lb Olive Camo (TALCLOC)
Our 45lb leadcore 1m leaders are made from our Olive Camo 45lb leadcore to suit gravel or weedy areas. The leadcore is broken up into 100mm alternating colour sections which aids its disappearance on all manner of lake-beds. The leaders are 1m in length with a spliced loop at either end.
Forceps (TAF)
These 5” short nosed forceps will allow you to get a really firm hold of the hook, even if there is only a relatively small section of metal to grip onto. Gently rotate the hook, withdrawing it along the same angle that it penetrated, being mindful to be as gentle as possible, avoiding any damage.
PTFE Size 8 Ring Quick Link Swivels (TARSQL8)
Size 8 ring swivels with a quicklink attachment for changing hooklengths in an instant. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
Camstiff Hooklength 35lb
A spool of stiff camouflage coated hooklength. Sprayed sections break up the ‘line’ of the rig across gravel, sand and silt bottoms.
Steams under tension to produce a stiffer hooklength. Available in 20m spools in 25lb and 35lb breaking strains in Weed Green, Gravel Brown and Silt Black
C-Clip Buffer Beads
These beads feature an enlarged central cavity, adjusted polymer and thinner wall thickness to allow consistent lead release when used in conjunction with our C-Clips. Available in green, brown and tungsten.
5mm Round Bead Tungsten (TARBT5)
5mm round tungsten beads with an ultra-fine, ‘pin-hole’ bore. Great when used as a bottom bead on a leadcore helicopter set-up. Also available in green. Supplied in packs of 12.
Buffer Beads Tungsten (TABBT)
A small bead that’s profiled to house a size 8 swivel. Great as a stop for traditional run rigs or when pushed onto the swivel of a lead as part of a helicopter set-up.