Tungsten dropper weights for all hook link materials including stiff mono and coated braids. Perfect for pinning down your hook link to the lakebed. Supplied in packs of 18.
All our products are NOT fit for human consumption.
£10.99 – £1,239.98Select options
This product has multiple variants. The options may be chosen on the product page
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£16.00Select options
This product has multiple variants. The options may be chosen on the product page
A spool of soft camouflage coated hooklength. Sprayed sections break up the ‘line’ of the rig across gravel, sand and silt bottoms.
Available in 20m spools in 18lb and 25lb breaking strains in Weed Green, Gravel Brown and Silt Black
£3.29Select options
This product has multiple variants. The options may be chosen on the product page
Size 8 swivels that can cope with any job in carp fishing. These will fit most safety clips and lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
A soft, 3mm oval bead ideal for protecting your hook point, whether your hook is sharpened or straight out of the packet. Place the bead over your hook point to prevent it blunting in transit.
£13.49 – £23.50Select options
This product has multiple variants. The options may be chosen on the product page
Sub-Fleck is a soft, natural feeling, incredibly heavy spliceable leader material, that is manufactured from 100% PTFE fibres. It is extremely fast sinking, offers high-level strength and abrasion resistance, whilst remaining very smooth and supple, and is extremely easy to splice securely. Available on 10m and 20m spools.
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The Barbless Curve Shank hooks are ideal for all manner of big fish rig applications such as braided KD rigs, 360s and the increasingly popular Ronnie rig.
£3.29Select options
This product has multiple variants. The options may be chosen on the product page
PTFE size 11 Swivels allow almost frictionless, rotational movement of hooklinks and hook sections, making them perfect for incorporating into the Hinged Stiff Rig. Supplied in packs of 10.
£7.99Select options
This product has multiple variants. The options may be chosen on the product page
Ready-made chod leaders, tied to our own exacting specifications using our 45lb Olive Camo Leadcore, PTFE Size 11 Ring Swivel, Leadcore Safety Top Bead, 8mm Green Oval Bottom Bead, Green Boom Shocker and Small Oval Clip. Six feet long. Three per pack
Unit E2, Russell Road, Rock Ferry, Birkenhead, CH42 1LU, UK
United Kingdom
AABaits 2025 | Website by Bsetec
Tungsten Droppers (TATD)
£4.49
Description
Tungsten dropper weights for all hook link materials including stiff mono and coated braids. Perfect for pinning down your hook link to the lakebed. Supplied in packs of 18.
Additional information
Tungsten Droppers
Recently Viewed Products
New Ultra Buoyant Fluoro Orange Pop Up Mix
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Related Products
Camsoft Hooklength 25lb
A spool of soft camouflage coated hooklength. Sprayed sections break up the ‘line’ of the rig across gravel, sand and silt bottoms.
Available in 20m spools in 18lb and 25lb breaking strains in Weed Green, Gravel Brown and Silt Black
Zig Rollers – 3 pack (TAZR3)
PTFE Size 8 Swivels (TAS8)
Size 8 swivels that can cope with any job in carp fishing. These will fit most safety clips and lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
Hook Point Protectors (TAHPP)
A soft, 3mm oval bead ideal for protecting your hook point, whether your hook is sharpened or straight out of the packet. Place the bead over your hook point to prevent it blunting in transit.
Supplied in packs of 20.
Sub-Fleck ‘Dark Camo’ 45lb
Sub-Fleck is a soft, natural feeling, incredibly heavy spliceable leader material, that is manufactured from 100% PTFE fibres. It is extremely fast sinking, offers high-level strength and abrasion resistance, whilst remaining very smooth and supple, and is extremely easy to splice securely. Available on 10m and 20m spools.
Curve Shank Hook – Barbless
The Barbless Curve Shank hooks are ideal for all manner of big fish rig applications such as braided KD rigs, 360s and the increasingly popular Ronnie rig.
(pack of 10)
PTFE Size 11 Swivels (TAS11)
PTFE size 11 Swivels allow almost frictionless, rotational movement of hooklinks and hook sections, making them perfect for incorporating into the Hinged Stiff Rig. Supplied in packs of 10.
Ready Leaders Chod Set-Up (TARLC)
Ready-made chod leaders, tied to our own exacting specifications using our 45lb Olive Camo Leadcore, PTFE Size 11 Ring Swivel, Leadcore Safety Top Bead, 8mm Green Oval Bottom Bead, Green Boom Shocker and Small Oval Clip. Six feet long. Three per pack