The extended length, tapered shape and texture of these kickers creates an aggressive hooking mechanism.
The unique double kick means that the hook turns aggressively and then targets the strongest hook-holds inside the carps’ mouth.
Available in Medium (hooks 6-7) and Large (hooks 4-7) in green and brown.
All our products are NOT fit for human consumption.
£9.49 – £974.99Select options
This product has multiple variants. The options may be chosen on the product page
*Our new Coloured wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The Curve Point hook has an in-turned point and in-turned eye and is also finished in our new slippery PTFE coating. The durable point is more suited to fishing over rock hard gravel areas where sharpness could be compromised when a big carp disrupts the area where the rig is laying.
£3.25Select options
This product has multiple variants. The options may be chosen on the product page
Small, C-shaped clips that you can use to release your lead from the end of your helicopter set-up. Two versions are available; one that releases at 3lb pressure, and the other which releases at 6lb pressure.
£3.29Select options
This product has multiple variants. The options may be chosen on the product page
Size 8 swivels that can cope with any job in carp fishing. These will fit most safety clips and lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
£8.99Select options
This product has multiple variants. The options may be chosen on the product page
Encrusted in a 400 diamond grit, the TA Hook Honer is an ideal stand-alone tool for reviving dulled hooks – with a multipurpose
handle offering the perfect solution for storing your file moisture free
These 0.60mm crimps are designed to work with a range of hooklink materials, forming strong and reliable connections. We recommend using crimps with products such as Recoil, Think Link, 25lb Tint Link or Crimp Link. The branded tin contains 100 x 0.60mm crimps.
Easy to use, moulded boilie stops with the choice of three different colour variations in each pack. Supplied in dull brown, deep red and pale yellow to match most food bait colours. 120 boilie stops of each colour supplied. (Total of 360 in a packet.)
£3.49Select options
This product has multiple variants. The options may be chosen on the product page
A baiting needle that’s been designed to make mounting extra-hard hookbaits safe and easy. Features an easy-grip handle and a hard, extra strong needle with a hooked end.
Unit E2, Russell Road, Rock Ferry, Birkenhead, CH42 1LU, UK
United Kingdom
AABaits 2025 | Website by Bsetec
Noodle Kicker Medium
£3.98
Description
The extended length, tapered shape and texture of these kickers creates an aggressive hooking mechanism.
The unique double kick means that the hook turns aggressively and then targets the strongest hook-holds inside the carps’ mouth.
Available in Medium (hooks 6-7) and Large (hooks 4-7) in green and brown.
Additional information
Green (TANKMG), Brown (TANKMB)
Recently Viewed Products
Fluoro Yellow Wafter Mix
*Our new Coloured wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Related Products
Curve Point Hook – Barbed
The Curve Point hook has an in-turned point and in-turned eye and is also finished in our new slippery PTFE coating. The durable point is more suited to fishing over rock hard gravel areas where sharpness could be compromised when a big carp disrupts the area where the rig is laying.
(pack of 10)
C-Clips
Small, C-shaped clips that you can use to release your lead from the end of your helicopter set-up. Two versions are available; one that releases at 3lb pressure, and the other which releases at 6lb pressure.
PTFE Size 8 Swivels (TAS8)
Size 8 swivels that can cope with any job in carp fishing. These will fit most safety clips and lead inserts. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
Hook Honer (TAHHT)
Encrusted in a 400 diamond grit, the TA Hook Honer is an ideal stand-alone tool for reviving dulled hooks – with a multipurpose
handle offering the perfect solution for storing your file moisture free
Heavy Rings (TAHR)
A small, solid ring designed for attaching a weak link to release your lead when fishing into heavy weed.
Crimps (TACR6)
These 0.60mm crimps are designed to work with a range of hooklink materials, forming strong and reliable connections. We recommend using crimps with products such as Recoil, Think Link, 25lb Tint Link or Crimp Link. The branded tin contains 100 x 0.60mm crimps.
Boilie Stops (TABS3)
Easy to use, moulded boilie stops with the choice of three different colour variations in each pack. Supplied in dull brown, deep red and pale yellow to match most food bait colours. 120 boilie stops of each colour supplied. (Total of 360 in a packet.)
Hard Hookbait Needle (TAHHN)
A baiting needle that’s been designed to make mounting extra-hard hookbaits safe and easy. Features an easy-grip handle and a hard, extra strong needle with a hooked end.