A soft, 3mm oval bead ideal for protecting your hook point, whether your hook is sharpened or straight out of the packet. Place the bead over your hook point to prevent it blunting in transit.
Supplied in packs of 20.
All our products are NOT fit for human consumption.
£8.99 – £949.99Select options
This product has multiple variants. The options may be chosen on the product page
*Our new plain wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This new wafter mix has now been made less buoyant, its does still allow you to add base mix (at a lower level) when creating matching hook baits. When being used without any other powders added to the mix a 15mm round hook bait should be roughly, the correct buoyancy and will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of our wafter mix by adding more powders to the mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£5.48Select options
This product has multiple variants. The options may be chosen on the product page
The size 11 Quick Change Ring Swivels are the ideal component for attaching the hook onto Spinner/Ronnie Rigs when using knotted booms, as the integral ring means that the hook has controlled movement. Supplied in packs of 10
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The super-slippery PTFE coated Straight Eye hooks are ideal for use with coated and uncoated braids, monofilament and fluorocarbon materials for all bottom-bait applications.
£5.48Select options
This product has multiple variants. The options may be chosen on the product page
Size 8 ring swivels with a quicklink attachment for changing hooklengths in an instant. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
£29.99 – £85.00Select options
This product has multiple variants. The options may be chosen on the product page
The mist grey colour tint applied to this exceptional, high-performance Fluorocarbon main line radically reduces visibility in situations where it is held off the lakebed by weed or steep-sided, topographical features. Standard white Fluorocarbon ‘glows’ in daylight as soon as it collects particulate, but the unique tint of FTX effectively absorbs most of this light, making it far less visible in this scenario.
For optimum knot strength with FTX, we recommend a five-turn Grinner, two-turn Tucked Blood, or Figure-of-Eight Loop knots (for loop-to-loop leader connections).
Available in 14lb (0.35mm) and 16lb (0.37mm) breaking strains on 200m and 600m spools. *600m spools have markers at 200m, 300m and 400m.
Our Camfleck camouflage cloth tape is made from 100% cotton. It’s ideal for camouflaging rod butts, storm poles, water containers, tea, coffee, sugar pots and tackle boxes.
£4.99Select options
This product has multiple variants. The options may be chosen on the product page
The super-slippery PTFE coated Barbless Straight Eye hooks are ideal for use with coated and uncoated braids, monofilament and fluorocarbon materials for all bottom-bait applications.
£3.98Select options
This product has multiple variants. The options may be chosen on the product page
The extended length, tapered shape and texture creates an aggressive hooking mechanism, flipping the hook and creating the strongest hook-holds. Available in Medium (hooks 6-7), Large (hooks 4-5) and XL (for hooks 2-4) in green and brown.
Hook Point Protectors (TAHPP)
£2.50
2 in stock
Description
A soft, 3mm oval bead ideal for protecting your hook point, whether your hook is sharpened or straight out of the packet. Place the bead over your hook point to prevent it blunting in transit.
Supplied in packs of 20.
Recently Viewed Products
Plain Wafter Mix (New)
*Our new plain wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This new wafter mix has now been made less buoyant, its does still allow you to add base mix (at a lower level) when creating matching hook baits. When being used without any other powders added to the mix a 15mm round hook bait should be roughly, the correct buoyancy and will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of our wafter mix by adding more powders to the mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Related Products
PTFE Size 11 Quick Change Ring Swivels (TARQCS)
The size 11 Quick Change Ring Swivels are the ideal component for attaching the hook onto Spinner/Ronnie Rigs when using knotted booms, as the integral ring means that the hook has controlled movement. Supplied in packs of 10
Straight Eye Hook (Barbed)
The super-slippery PTFE coated Straight Eye hooks are ideal for use with coated and uncoated braids, monofilament and fluorocarbon materials for all bottom-bait applications.
(pack of 10)
Oval Rubber Beads 5mm Tungsten (TAORB5T)
These 5mm tungsten oval beads have a bore that’s narrow enough to hold on leadcore without slipping on the cast. Supplied in packs of 10.
PTFE Size 8 Ring Quick Link Swivels (TARSQL8)
Size 8 ring swivels with a quicklink attachment for changing hooklengths in an instant. They now feature our new PTFE coating for super-slick, ultra-free rotation. Supplied in packs of 10.
FTX Fluorcarbon Main Line
The mist grey colour tint applied to this exceptional, high-performance Fluorocarbon main line radically reduces visibility in situations where it is held off the lakebed by weed or steep-sided, topographical features. Standard white Fluorocarbon ‘glows’ in daylight as soon as it collects particulate, but the unique tint of FTX effectively absorbs most of this light, making it far less visible in this scenario.
For optimum knot strength with FTX, we recommend a five-turn Grinner, two-turn Tucked Blood, or Figure-of-Eight Loop knots (for loop-to-loop leader connections).
Available in 14lb (0.35mm) and 16lb (0.37mm) breaking strains on 200m and 600m spools. *600m spools have markers at 200m, 300m and 400m.
Camfleck Cloth Tape (TACCT)
Our Camfleck camouflage cloth tape is made from 100% cotton. It’s ideal for camouflaging rod butts, storm poles, water containers, tea, coffee, sugar pots and tackle boxes.
Straight Eye Hook – Barbless
The super-slippery PTFE coated Barbless Straight Eye hooks are ideal for use with coated and uncoated braids, monofilament and fluorocarbon materials for all bottom-bait applications.
(pack of 10)
Noodle Kicker Extra Large
The extended length, tapered shape and texture creates an aggressive hooking mechanism, flipping the hook and creating the strongest hook-holds. Available in Medium (hooks 6-7), Large (hooks 4-5) and XL (for hooks 2-4) in green and brown.
Supplied in packs of 10.