£3.29Select options
This product has multiple variants. The options may be chosen on the product page
PTFE size 11 Swivels allow almost frictionless, rotational movement of hooklinks and hook sections, making them perfect for incorporating into the Hinged Stiff Rig. Supplied in packs of 10.
£9.49 – £974.99Select options
This product has multiple variants. The options may be chosen on the product page
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£10.99 – £1,239.98Select options
This product has multiple variants. The options may be chosen on the product page
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Over the last few years, we have worked tremendously hard sourcing only the highest quality ingredients, liquids, and additives available from all over the globe. Many of our new products are now exclusive to AA Baits, which allows us to formulate and offer the very best, premium quality in-house mixes, available on the market. That being said, we do keep a handful of specially sourced products close to our chest, making our mixes stand out from the rest đ. In order for all our customers to receive a premium mix at a very fair price, we have always supplied direct. Cutting out the middle man allows us to operate using all our finest ingredients and stimulants. This also allows our finest products to be used at optimal levels.
This fish-meal base mix contains a large amount of high quality Norwegian (LT-94) fishmeal, milk and egg proteins, kelp meal, soya flour and CLO, this mix has been formulated to provide a balanced food source that is suitable for use in summer and winter months. Rolls easy and works very well.
This mix requires approximately 9 eggs per Kg of dry mix.
All our base mix’s are tried, tested and roll perfectly. We use only the highest quality ingredients available, in all optimum levels formulating an excellent food source which in turn keeps the fish coming back for more as they become familiar with the nutritional value of the bait.
Contains : Large Amount of Norwegian LT94 Fishmeal, Salmon Fishmeal, CLO, Kelp Meal and milk & egg proteins to name just a few ingredients in this mix.
Our mixes do arrive ready to roll, but many of our customers do add their own ingredients and additives to make it a unique formulation. Please bear in mind altering the mix may affect the rolling so some trial and error might be required depending on the products being added.
Example – Our Base Mix 85% , Variety of chosen ingredients 15%. Please see below as an example. Happy rolling and tight lines.
AABaits Basemix – 85%
Krill Meal – 5%
Brocacel yeast – 2.5%
GLM Powder – 2.5%
Spices – 2.5%
Betaine 2.5%
TIP: When making your own boilies it gives you the chance to NOT boil some. This allows you to have baits that havenât been boiled, which in turn looses some goodness. But most of all it allows these baits to break down and disperse all the soluble attractors and feed stimulants into your swim much faster. These baits would require being kept in a bucket/container to save being crushed/broken once dried. Again these baits wouldnât be hard enough to be used in a throwing stick.
£9.49 – £974.99Select options
This product has multiple variants. The options may be chosen on the product page
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£42.99Original price was: £42.99.£32.99Current price is: £32.99.Select options
This product has multiple variants. The options may be chosen on the product page
We have managed to source some fantastic liquid egg. This fresh liquid egg has been made from newly laid fresh hen eggs and hasn’t been produced from seconds (hen eggs that have been cracked or broken). The liquid is quickly produced then blast frozen giving a rough self life of 5/7 days if kept refrigerated once defrosted. Our liquid bait preserve can be added (mixed together thoroughly) once defrosted extending shelf life.
This will leave our warehouse fully frozen and will take over 36hours to fully defrost.
We do ship all our goods on a next day service but please do bear in mind that courier delays do happen from time to time.
£9.49 – £974.99Select options
This product has multiple variants. The options may be chosen on the product page
*Our new Coloured wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£10.00 – £1,199.99Select options
This product has multiple variants. The options may be chosen on the product page
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
£10.00 – £129.98Select options
This product has multiple variants. The options may be chosen on the product page
This pop-up mix will make very buoyant hook baits which will remain buoyant in excess of 48 hours. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
One egg will take approximately 100-120 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
This pop up mix needs to be boiled for 90 seconds.
50/50 Base Mix
£3.99 – £614.99
50/50 Base Mix
Recently Viewed Products
PTFE Size 11 Swivels (TAS11)
PTFE size 11 Swivels allow almost frictionless, rotational movement of hooklinks and hook sections, making them perfect for incorporating into the Hinged Stiff Rig. Supplied in packs of 10.
Related Products
Fluoro Pink Wafter Mix
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
New Ultra Buoyant Fluoro Orange Pop Up Mix
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Fishmeal Base Mix
*Our fishmeal base mixes contain our genuine premium Norwegian LT-94 & Newly sourced feed stimulants.
Over the last few years, we have worked tremendously hard sourcing only the highest quality ingredients, liquids, and additives available from all over the globe. Many of our new products are now exclusive to AA Baits, which allows us to formulate and offer the very best, premium quality in-house mixes, available on the market. That being said, we do keep a handful of specially sourced products close to our chest, making our mixes stand out from the rest đ. In order for all our customers to receive a premium mix at a very fair price, we have always supplied direct. Cutting out the middle man allows us to operate using all our finest ingredients and stimulants. This also allows our finest products to be used at optimal levels.
This fish-meal base mix contains a large amount of high quality Norwegian (LT-94) fishmeal, milk and egg proteins, kelp meal, soya flour and CLO, this mix has been formulated to provide a balanced food source that is suitable for use in summer and winter months. Rolls easy and works very well.
This mix requires approximately 9 eggs per Kg of dry mix.
All our base mix’s are tried, tested and roll perfectly. We use only the highest quality ingredients available, in all optimum levels formulating an excellent food source which in turn keeps the fish coming back for more as they become familiar with the nutritional value of the bait.
Contains : Large Amount of Norwegian LT94 Fishmeal, Salmon Fishmeal, CLO, Kelp Meal and milk & egg proteins to name just a few ingredients in this mix.
Our mixes do arrive ready to roll, but many of our customers do add their own ingredients and additives to make it a unique formulation. Please bear in mind altering the mix may affect the rolling so some trial and error might be required depending on the products being added.
Example – Our Base Mix 85% , Variety of chosen ingredients 15%. Please see below as an example. Happy rolling and tight lines.
AABaits Basemix – 85%
Krill Meal – 5%
Brocacel yeast – 2.5%
GLM Powder – 2.5%
Spices – 2.5%
Betaine 2.5%
TIP: When making your own boilies it gives you the chance to NOT boil some. This allows you to have baits that havenât been boiled, which in turn looses some goodness. But most of all it allows these baits to break down and disperse all the soluble attractors and feed stimulants into your swim much faster. These baits would require being kept in a bucket/container to save being crushed/broken once dried. Again these baits wouldnât be hard enough to be used in a throwing stick.
Fluoro Orange Wafter Mix
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
Fresh Liquid Egg (Frozen)
£42.99Original price was: £42.99.£32.99Current price is: £32.99. Select optionsWe have managed to source some fantastic liquid egg. This fresh liquid egg has been made from newly laid fresh hen eggs and hasn’t been produced from seconds (hen eggs that have been cracked or broken). The liquid is quickly produced then blast frozen giving a rough self life of 5/7 days if kept refrigerated once defrosted. Our liquid bait preserve can be added (mixed together thoroughly) once defrosted extending shelf life.
Fluoro Yellow Wafter Mix
*Our new Coloured wafter mix has been formulated with less buoyancy.
After being asked many many times for a wafter mix we are extremely happy to offer this superb mix. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force. This wafter mix has been made on the buoyant side allowing you to add base mix when creating matching hook baits. When being used without any other powders added to the mix a dumbell wafter (12mm size nozzle on a 15mm rolling table) will sit nicely using a size 4 hook with a ring swivel. There is always going to be a little trial and error when creating these sort of hook baits, you can alter the buoyancy of the mix by adding more powders to the wafter mix until you achieve your desired waft. Make sure you write everything down in percentages, you can then alter your percentages until you achieve your required buoyancy, also remember the buoyancy will increase slightly as the hook bait dries out, vice versa once the hook baits takes no water it will decrease the buoyancy. Good luck and happy rolling.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 4 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg wafter mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg wafter mix. These are recommendations and can be altered until you achieve your desired colour. Add both wafter mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This wafter mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
New Ultra Buoyant Plain Pop Up Mix
*Please note that you will need to add more of the new pop up mix to your liquid egg than with our original mix, not adding enough pop up mix with create really soft pop ups. You need to add as much pop up mix as you can, stopping just before the dough goes too dry.
This pop-up mix will make extremely buoyant hook baits which will remain buoyant for days (we tested a 12mm for 5 days). We have been asked over and over again for a pop-up mix that is buoyant enough for a 12mm hook bait to hold a size 4 hook up with a ring swivel, look no further this pop-up does just that. The 12mm hook baits we have experimented with have stayed popped up for 5 days, we then stopped testing. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
One egg will take approximately 80-100 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
Simply add 40g Fluoro dye per kg pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
With this mix being so buoyant it allows you to add extra base mix when creating wafters.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
This pop up mix requires boiling for roughly 90 seconds for a 12mm and 120secs for 15mm hook baits.
AA Baits Original Plain Pop Up Mix
This pop-up mix will make very buoyant hook baits which will remain buoyant in excess of 48 hours. Made with Milk and Egg Proteins thus increasing leakage, it also takes on attractors and flavours extremely well, you will find it easy to use and roll. It has a firm texture but remains soft enough to use with a bait needle without excessive force.
Simply add 40g Fluoro dye per kg plain pop-up mix to create fluorescent hook baits. For washed out add 20g white dye and 20g fluoro dye per kg pop up mix. These are recommendations and can be altered until you achieve your desired colour. Add both pop-up mix and your chosen dyes into a large plastic bag, then close bag trapping some air inside and shake well until mixed evenly.
For shelf life hook baits add 10-15ml of bait preserve per egg. It is important to remember the main part of the process is to dry your hook baits well prior to storing, usually a minimum of 48hrs, it can be slightly longer in the colder months due to extra moisture being in the air, the longer your hook baits are dried the less the moisture content will be helping to prevent mould growth.
One egg will take approximately 100-120 grams of pop-up mix. You will get approximately 5 pots of pop ups per 250 grams of pop-up mix once made.
This pop up mix needs to be boiled for 90 seconds.